Aluminum

Aluminum

ALUMINUM
SECTOR

Aluminum oils are special oils used in aluminum processing processes. These oils are designed to provide lubrication, reduce wear and control heat during cutting, shaping and surface treatment processes of aluminum parts.

Aluminum oils are special oils used in aluminum processing processes. These oils are designed to provide lubrication, reduce wear and control heat during cutting, shaping and surface treatment processes of aluminum parts.

Non-staining maintenance oils have been developed to ensure that the oils used in production lines and equipment do not leave any traces or stains on aluminum surfaces. These oils extend equipment life while also improving production quality by helping to keep metal surfaces clean.

These products are used to ensure that production processes are safe, efficient and provide high quality results.

 
Cold Rolling Oils Petral Series
Additives Petral AD Series
Non-Staining Maintenance Lubricants Hydroil Series
Carinal Series
Oil Recovery Oyster BW
Milling Lubricant Mackerel Series
Roll Grinding Oil Mackerel TPR
Antistatic Agent Petral AS
Foil Coating for Food Containers Fagus GS 95R
 
COLD ROLLING BASE OIL
  • It creates a film layer between aluminum and steel rolls.
  • As the cold mill works, it provides cooling against the load on rolls
  • Provides gap cleanliness.
Product Code Distillation Range Kinematic Viscosity Flash Point
(Ibp-Fbp), °C @ 40 °C, mm²/s °C, (min.
PETRAL Series F 220-250 1,880 110
R 280 220-240 1,900 90
RW 215-255 2,100 100
R 295 230-272 2,400 100

*Optional products can be developed apart from the products given in the table.

COLD ROLLING ADDITIVES
  • It is used with cold rolling base oils.
  • It contributes to rolling oil for oil film strength.
  Product
Foil Rolling Sheet and Foil Rolling
PETRAL Series AD 2 AD 4 AD 6 ADI ADS ADD
Antioxidant
Alcohol
Ester
Acid

*Optional products can be developed apart from the products given in the table.

NON-STAINING HYDRAULIC FLUIDS, BEARING AND GEARS FLUIDS
  • They are maintenance oils that do not cause stains in the annealing operation in the aluminum cold rolling mills.
  • It is used in low and high pressure hydraulic systems.
  • Bearing oils have been developed for oil mist systems and are also used in conventional lubrication systems.
  • In addition to containing special anti-wear additives, it provides maximum protection against rust and oxidation and separation from water, prevents foam formation.
Product Application Area Kinematic Viscosity
@ 40 °C, mm²/s
HYDROIL XL Series Hydraulic 46
68
CARINAL ZS Series Sliding Bearing, Gear and Bearing
(Compatible with air-oil and oil-mist systems)		 100
220
320

*Can be produced in desired viscosity.

FIRE RESISTANT HYDROLIC FLUID
  • A fire-resistant water/glycol type hydraulic fluid that does not contain nitrite or Monoethylene Glycol (MEG) and has high biodegradability.
  • When ignition occurs, the water in the product evaporates and forms a smothering layer over the flame, preventing the spread of the fire.
Product Application (Type) Viscosity
@40 °C, mm²/s		 Application Area
REMORA HFC Series Hydraulic (Water-Glycol Based) 46 Casting Furnaces
MILLING LUBRICANTS
  • MACKEREL ET, It has been specially developed for the elimination of edge cracks in aluminium continuous casting lines.
  • It provides a smooth milling surface without staining on the hot sheet.
  • MACKEREL NT 32, is high temperature cutting oils with different viscosities. It is formulated with a special blend of premium quality base oils and loader (EP) enhancing additives.
Product Code Application Area Viscosity
@40 °C, mm²/s
MACKEREL Series ET Continuous Casting 35
NT Slab Scalping Operation 32
RECYCLING SYSTEM COOLING OIL
  • It has been developed for an efficient recovery operation in rolling oil distillation units.
  • It is an oxidation-resistant and long-lasting washing oil.
Product Code Application Area
OYSTER Series BW Rolling Oil Recovery
ANTISTATIC AGENT
  • It is a specially developed additive that increases conductivity in rolling oils.
  • It is used to prevent situations where low conductivity poses a fire risk.
Product Code Application Area
PETRAL Series AS Antistatic Agent
FOIL DRAWING LUBRICANT
  • It is a forming oil developed for use in the production of aluminum foil food container.
  • It meets all food compliance such as Halal, Kosher, NSF, FDA, RSPO.
Product Code Application Area
FAGUS Series GS 95 R Aluminium Foil Food Container Manufacturers Foil Manufacturers
 
 

CONTACT US
FOR MORE INFORMATION

Feel free to contact us for more information about our products and services, or to place an order. Our experts would be happy to assist you!

CONTACT US
 
 
MEMBERSHIPS

MEMBERSHIPS

Petroyag keeps its quality and assurance standards at the highest level through its collaborations and memberships with the leading organizations of the sector. Acting with strong references in the national and international arena, it continues to offer reliable products and services to its customers.